Archive for July, 2024

After rebuilding almost everything on the interrogation chair in low-poly (and pretty much all the 90° turns because none of them was square), the model currently clocks at 6600 triangles, across 5 objects.

Ratcheting only one side of the wrist restraints cuts down a little less than a thousand triangles. I could probably bake those teeth into a texture?

I’m super happy of the “lock” redesign, it is still crude & simple to use and hypothetically manufacture, but it now looks like it is suitably load-bearing…You probably could stand on top of the tray and it wouldn’t sag in any way.

All in all, this isn’t really a priority project but I kept going back to it over the weekend.

I’d like to move onto the wrist cuffs for the vergilius set relatively quickly, but I need to do a little bit of research first, to be sure.

And the KDC Vergilius Collar is out! I am curious to see the kind of feedback I’m going to get with this one…

As I mentioned earlier it is fully PBR and fully colorable, I’ve kept the texture count as low as possible, brushed metals & rubber have pretty minimal requirements under PBR, and that should be okay, so long as the environment you are standing in has sane settings (Dead Realm needs an update really bad on that front, but we’ll get there, I just need the time, and to focus on it for a few days)

As usual, you can grab it from the KDC Main Store (10% off), or from the SecondLife Marketplace.

Enjoy!

I want to thank whoever messed with the strawpoll, I guess next time I’ll stick to Patreon for those?

Anyway, I made an executive decision and decided to go with the “hotfix first” option, here is a summary of v17:

• Fixed the lingering particle system issue caused by a packaging bug in the previous update.
• PBR hotfix: Click points should now be completely invisible on PBR clients.
• Lockbreaking notifications should now be sent to the right avatar UUID.
• Added a safety check to prevent leashing to unreachable objects under RLV.
• Added the sit-lock feature, which prevents unseating when chained while sitting.
• I’ve also replaced the clickers again with optimized mesh versions (we’re down to 39LI).

The updater should notify you soon enough, you all know the process by now ^^.

I also want to apologize for taking so long to bring those features up on the belt, I did not realize it had been this long.

Quick update because a few things have happened since yesterday:

A kind soul on the KDC Booth Store reported an issue with the parameter setup of the VRChat Stunprod. That is now fixed and you can download the package (version 1.2) to correct the problem (the Patreon reward has also been updated).

Someone also made me aware of a packaging/assembly error with the KDC Lined Chrome Chastity belt; There are floating chain links on points that cannot receive or send chains, making it impossible to remove them. The fix is relatively simple but it took a moment to figure out what exactly happened.

I was also considering putting out some PBR related fixes and ended up starting a full PBR refresh of the material, picture included: on the left is the original and on the right, the PBR version. Nothing fancy, that’s more or less what it would have looked like if we had decent metal rendering back then.

If I actually do this I’m gonna have to do some edits in the HUD & labia shroud code to dual-stack the two material systems, the same way I’ve done with the Stunprod.

So I’m going to run another little poll for this one again.

Here is another attempt at the interrogation chair project, I like it a lot more than my previous attempts which I’m not sure I’ve ever posted here. I was hoping to integrate some kind of knee-spreader, but so far, cannot figure out of a good approach that also fits the overall design of this contraption.

I look so unhappy in this pictures, ^_^ I wonder why!

Blender’s renderer & denoising have really come a long way, and this is nearly at real-time speed on GPU compute. Would you look at that.

As for the Vergilius collar, I finished writing the code yesterday, I was going to do product pictures, manuals, and all those little things but my home server appears to have given up the ghost, which pretty much ate the rest of the afternoon.

I haven’t entirely lost hope but I might have to look for a replacement… and an IDE drive adapter of sort (it is THAT old). Thankfully, it did not contain much of value other than lots of scripts and somewhat useful services and things I figured out over the years. For the time being, I’ve moved the really important stuff (customer mails & sale reports) to a different machine.

Alright we’ve had a few setbacks. Last minute change and I decided to add an occlusion map, which required of me to try a bit harder with my UVs, which also required rebuilding the LOD models that I thought I was done with Monday.

I’ve also decided of a name for this line “Vergilius”; It has a nice ring to it.

There is a problem however, and that is related to the script/behavior. I really have two options with this slightly unusual “side locking” system:

• Option A: Treat both lock points as one, simple to use, but that means they cannot be chained to or from.
• Option B: Treat both points independently, that means the collar would only be RLV-locked if BOTH lock points are fitted with a padlock, both would then be valid chain targets and sources (side collar points currently only exist on the braced collar)

EDIT: You can vote which option you prefer here.

PBR is officially out, right? It’s been for months on the official viewer, and is now on Firestorm, which means that it is out for 99.9% of the user base.

I’ve decided to try my hands at a quick little project and see how well it ends up doing.

In general, I tend to avoid making latex products unless it is something truly special, as there is little point in competing with creators that pump that stuff out all year round. That being said, I think I’ve gotten pretty good at making actual, realistic latex/rubber using PBR materials, and people have been asking for a serviceable rubber set for literally years at this point.

This will be PBR-only (sure, try to change my mind on that one) and should be super easy to recolor and mod. I think I’ll also keep the front pin/post as a separate mesh, this way you can move it in another hole if you don’t want it centered, for some reason.