I had to get rid of the diamond-shaped top on the padding because it did not allow me to put anything on top of them. Which was an issue, since the new padded anchor plates I’m making for this cell version are designed to sit there.

The new chain anchors are based on the ones in Tang‘s “Horny Jail” set (go check it out), those are kinda meant to be low-profile floor/wall inserts. It would be better with straps, but I can’t really have that.

The low-poly door padding is also complete and I’ve closed off the bottom hatch of the door with a little umm… kick plate? I don’t know, I could have removed everything but it looked a bit bare. The door padding will have to be colored all as one because I do not have an extra mesh “face” to spare for the bottom section. Oh well.

More padded cell progress! I’m so original with titles, isn’t it?

I’ve unwrapped all the cell padding and done some test normal/texture baking. It pretty much looks identical, so this is another case of me trying too hard… I guess? The mesh “faces” I reclaimed from the floor/walls of the cell are just enough to have the door side pads, the walls, and the accent pads.

I’ve also started to modify the low-poly door, I’m wondering if I should make those door pads even thicker, I’m just not sure that it is going to clear the doorframe anymore if I do. It is also going to eat an extra mesh “face” and I don’t really have any spare unless I remove the bars from the window and go for glass-only.

Small update, I’ve refined the padding shape a little, tightened the gaps between the cushions, and fixed alignment issues left and right.

The last picture is the updated high-poly, and I also used blender’s new denoiser for the render so it takes less time (not that it is of any use for the model itself, but hey fancier picture), I need to use this more/remember that it exists.

I also modeled a big chunk of the low-polygon mesh. I haven’t tried rendering my normal maps yet or done any preliminary unwrapping either. This is a bit dense geometry-wise for a piece of structural mesh but it should be very easy to optimize on the lower LODs.

I’m still debating on re-adding the lower hatch on the door. Simply because it means I don’t have to create a texture variant for the door itself and only have to pad the inside 😛

(Well, the hatches also add a lot of visual appeal to the door’s otherwise flat surface)

I have finally decided to start working on a padded cell variant of my modular cell unit.

The design is VERY inspired by the amazing art of tangdraws. Go check his work, it is just that great. Somehow the tan padding has this sort of “Alien” (the movie) vibe?

I’m trying to get a good layout for the padded tiles, none of the internal dimensions of the cell are falling quite “right” to get a perfect grid, so I’m cheating here and there.

The left side of the door still upsets me…

The door itself will probably look like the regular cell door from the outside, without the bottom hatch, but I want to keep the middle hatch to give prisoners a “chance” to escape.

I should make the yearly “post-Christmas sickness” a scheduled task or something because it happens with clock-like predictability.

I’m not dying, at least I don’t think I am, don’t worry. I’ve been taking my meds and resting the last couple of days.

I’m just about to leave to spend a couple of days with relatives. I wish you all happy festivities and will be back very soon~

There will be an update for it very soon to add the non-fitmesh panties/crotch strap that I still need to re-weight properly, but everything else is good and ready for the KDC Micro Bikini release!

And as a bonus, (since this is the season), I’ve added a “candy-cane” red & white strap pattern for no good reason.

As usual, you can find it on the SecondLife Marketplace, or at the KDC Main Store (10% off!)

The Bikini HUD is almost complete, I wanted to post earlier but I had nothing that I could really showcase.

You can see the options on the attached pictures, it uses my usual “preset script” for colors, and all the menus support multiple pages of options if you really need it as well as RGB entry.

I’ve added one last feature to the material preset system to have, or not have a fine “noise” in the specular map to simulate fabrics like cotton and lycra, or to go for a smooth specular map for things like latex.

I’m including a handful of fun texture options for the panels & the straps.

The past two days have been filled with weight painting mistakes and texture attempts.

Long story short, I ended up shifting the bikini bra lower tie about 2cm down to avoid a specific spot in the back that caused unwanted clipping that no one but me would have noticed. And it led to many, many back and forths where every upload that I thought was final, needed more fixing.

The ribbons & panels can be tinted independently, but I’ve also made some simple texture variants: classic shima-pantsu and a Chinese prison-themed one (because obsessions never go away).

I’ve started writing an over-engineered HUD to go with it with a few handy functions for setting colors, hiding the ties, and setting material properties (it is way too complex for what it does and is still subject to change).

Today has been fairly productive and I managed to complete the large, medium, and small chest options, LOD included. All that remains is the “flat” chest, which will take some “delicate” reshaping to look right.

And yes, rather than stretching the bra with chest sizes I chose to keep it the same size, making it well… really small on the largest Avatar 2.0 chest.

I might try to fit it to the “tit kit” too, but it will depend on how badly the avatar sliders deform it.