Archive for the ‘3D Stuffs’ Category

On the menu today:

• Slimmed down the edge trims to be more “in line” with what I had in mind.
• Much bigger leash ring. (bigger is cuter)
• Sturdier hinge & pin. (making it seamless was a pain with the modeling method I’m trying)
• Metal and edge wear tests. (I think it’s just too much but some discrete edge would give it some personality)

I would like those screw holes in the collar to be a litle less sharp, but the model has a tendency to explode 😀

I’ve played a bit with some interesting modeling methods I discovered during my break.

The idea of this collar is that it’s going to use threaded bolts instead of padlocks for locking, and it is constructed in such a way that you have to “lock” it to get a leash ring (the ring is attached to the mending plate on front) and unlocking it will effectively get rid of that ring. Quirky, I know.

• Picture 1 was the initial design but I’ve widened the edges and made them a bit more rounded.
• Pictures 4-5-6 show how it looks unlocked, partially and fully bolted.

Unwrapping done, this is my first bake test on this project and it looks amazing 😀

I got everything laced up cleanly and optimized the hell out of it, that’s about 1200 triangles worth of lacing in the end. Unfortunately there is no way around this.

I’ve also started packing my UVs and went for an “optimized” solution for the lacing texture ( 32×32 pixels 😛 ).

I really hope it will look right in the end.

Pretty much. I also would like to take some time to figure out if there is any chance to simplify the model further. 4500 triangles is still an awful lot.

I blame all those curved texture seams!

I was pretty much nodding off the entire evening yesterday so I pressed on until the main body was completely filled in.

I’m not sure if it looks any different from this angle…

I ment to do more today but I won’t have time to do much, so here is yesterday’s update that I forgot to post.

Again the center area is getting progressively better, and I did some work on the tongue and velcro straps, it’s getting there but it’s too slow!

I’ve also added a nice and comfy lining. Now it’s even thicker.

Soon enough this is going to turn into a ski boot 🙂 I hope not!

…and I don’t like it. It looks clumsy, the flow is bad, it’s too dense. But I guess it will do for now.

A brief gallery of the progress over the last two days. On the last picture I also adjusted the velcro straps to have longer ends.