User Tools

Site Tools


walkietalkie:start

This is an old revision of the document!


Interface

The radio interface can be opened by clicking the radio. If the radio is rezzed inworld, only it's owner can do so.

You will be presented with a set of 3 letter buttons.

PWR

This option will toggle the unit power on and off. When unpowered, it cannot send or receive messages.

SET

Will allow you to set the frequency that your radio unit will listen and broadcast on. The possible frequencies range from 88.1 to 108.1 in 0.1 Mhz increments.

CLR

Will clear the frequency that the radio is currently using.

▲/▼

Will switch memory bank. This unit has 4 memory banks that can remember a distinct radio frequency and it's shift value.

SPK

Will toggle on and off the reception of text communications. The corresponding LED will change from red to green.

CQ

Will toggle on and off the morse code transducer. The corresponding LED will change from red to green.

SH+/-

Will 'shift' the radio codec by one byte. This function will scramble sent and received messages for anyone who isn't set on the same shift value. The shift value can go from 0 to 2.

walkietalkie/start.1444826243.txt.gz · Last modified: 2017/04/04 10:35 (external edit)