User Tools

Site Tools


touchbound_system:hired_help

This is an old revision of the document!


<<Return to the table of content

Supported TouchBound functions

Sensing zones

  • In RED: The zone that react as the lock point (or pull down the bib if it is up).
  • In GREEN: The zone that react as the pull down/up point for the bib.

Supported locks

Notes on adjusting the dress

While the dress is a fitted mesh, it is not the case of the sensing zone prims or the padlock. Because every avatar is different, the parameters of your avtar's torso will determinate where the locking post will be. Adjusting the position of the padlock is easy if you have a little bit of experience with adjusting attachments:

  • Enable “Highlight transparent objects” to be able to see the padlock position (you can also lock the dress to make it visible)
  • Right click > Edit the dress (there is no need to select “edit linked parts” fitted meshs cannot be “moved” so the only parts that will move are the ones we want.
  • Carefully, drag the editing arrows to move the padlock, the “perfect” position is when the padlock bow cross the locking post.

touchbound_system/hired_help.1419265943.txt.gz · Last modified: 2017/04/04 10:35 (external edit)