KDC Product Documentations

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
^  {{ :touchbound_system:headcage.png?nolink |}}  ^
|  Heavy Metal HeadCage  |

====== Supported TouchBound functions ======
   * [[touchbound_system:locking_unlocking|Locking/unlocking]].
   * [[touchbound_system:chaining_leashing|Chaining/leashing]].
   * [[touchbound_system:collars#bondage_poses|Bondage poses]].
   * [[touchbound_system:BACKGROUND_LOOP|Neck pose]].
   * [[touchbound_system:suspension|Suspension]] ([[touchbound_system:headcage#suspension_poses|Poses]])
====== Sensing zones ======
^ {{touchbound_system:headcage-zones.png?200 |}} ^

  *Lock point: Under RLV will prevent the object from being detached, can be locked.
  *Leashing points: can draw and receive chains, to leash handles, anchor points, other restraints and even restraints worn by others!
====== Supported locks ======

   * [[touchbound_system:KeylessPadlock:|Keyless padlocks]].
   * [[touchbound_system:FingerprintPadlock|Fingerprint padlocks]].
   * [[touchbound_system:keyedpadlock|Keyed padlocks]].
   * [[touchbound_system:timepadlock|Time-release padlocks]].
   * [[touchbound_system:tag_plate|Lockpoint accessories]].

====== Versions in the package ======
The KDC headcage is provided in 3 versions with slight variations:
   * **Normal**: Partial neck pose, pre adjusted to fit most human avatars
   * **M3**: Slightly larger than the normal version, to accomodate M3 and other anime-type heads.
   * **Stiff**: Full locking neck pose, use this if you don't want the avatar's head to move inside the cage and/or if you want to scale the cage much tighter around the wearer's head.

//Note that with the normal and M3 version, it is normal to experience some occasional clipping of the head through the cage as the head is allowed to tilt and rotate and there is no way to partially restrict it. It's all or nothing. I recommend to adjust the cage in such a way that most of the clipping happens inside hair and/or the back of the skull as it will look more natural than if the face is clipping.//
====== Bondage poses ======
This table contains all the special poses that the headcage can initiate, the source object the the first object that you click in the touch sequence, while the target object is the second object in the sequence.

Some chaining combinations will offer you to add a specific bound poses, if the current avatar limb configuration allows it.

Some poses only use one arm at a time, which allows you to either bind both arms in the same pose, or use a different pose on the remaining arm. Check the corresponding column.
^    Pose        ^  Source object      ^   Target object     ^  Description  & examples  ^ single wrist ^
|  Tight front   |  HeadCage front lock  |  Any wrist cuff     | {{:touchbound_system:tight_front_l.png?100|}}{{:touchbound_system:tight_front_r.png?100|}} One hand is tied at the front of the collar.  |  yes  |
|  Low front     |  HeadCage front lock  |  Any wrist cuff     | {{:touchbound_system:low_front_r.png?100|}} Similar to "tight front" but in a lower, more relaxed position. |  yes  |
|  Low back      |  HeadCage back ring  |  Any wrist cuff  | {{:touchbound_system:low_back.png?100|}} Similar to "low front" but in the back.  |  yes  |
|  Inv. prayer   |  HeadCage back ring  |  Any wrist cuff  | {{:touchbound_system:inv_back.png?100|}} A very tight and high back bound pose.  |  yes  |
|  Over head     |  HeadCage back ring  |  Any wrist cuff  | {{:touchbound_system:overhead.png?100|}} The wrist is bound to the back of the collar in an overhead fashion.  |  yes  |
|  Ballerina     |  HeadCage top ring  |  Any wrist cuff  | <IMAGE NEEDED> The wrist is bound to the top of the headcage.  |  yes  |

====== Suspension poses ======
^ Source point ^ Image ^
| HeadCage overhead ring | {{touchbound_system:headcage-suspension.png}} |