User Tools

Site Tools


kdc_institutional_straitjacket:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
kdc_institutional_straitjacket:start [2010/02/03 20:47] kyrahabattoirkdc_institutional_straitjacket:start [2017/05/16 16:37] (current) – Retired mark. kyrahabattoir
Line 1: Line 1:
-====== Changing the configuration ====== +**THIS PRODUCT IS OUTDATED AND NOT AVAILABLE ANYMORE IN THE STORE**
-===== As the wearer =====+
  
-To change the parameters of the KDC Institutional Straitjacket, you need to use the SETTINGS buttons. +Where you looking for the [[touchbound_system:wardenstraitjacket|Warden Straitjacket]] instead?
-From there you have access to the following options:+
  
-FABRIC:                 This sub menu will open the fabric selection menu +====== Changelog ====== 
-ACL SETUP:          This sub menu allows you to control precisely who you allow some control on your straitjacket. +==== Version 1.3.1 ==== 
-RLV OPTIONS:     If you are using a "Restrained Life Client" this sub menu will allow you to configure precisely what RLV features you want (disabled by default)+  * Small adjustment of the minimum RLV version check because at the time of writing this, Phoenix is using a slightly lower version number for RLV ( 2.02.00.01 ) everything should work now. 
 + --- //[[me@kyrahabattoir.com|Kyrah Abattoir]] 2011/01/06 18:09// 
 +==== Version 1.3 ==== 
 +  * Added support for Display names in texts. 
 +  * Added support for User names along with Legacy names for the whitelist format. 
 +  * Changed notecard permissions to fullperm to avoid problems with access list change detection. 
 +  * Fixed the RLV lock to be "attachment bump" proof. 
 +  * Removed cooldown cancelling if you tried to free yourself before the time is up (it only tells you that you are too tired now) 
 +  * Added automatic edit prevention when using the RLV locking. 
 +  * Modified the whitelist parsing so it ignore whitelist modifications when tied up. 
 +  * New chest invisible prims with better coverage. 
 +  * Removed an unneeded script. 
 +NOTE: The leather texture pack was packaged in a previous version by error, this is fixed now. (For those who profited of the mistake, consider it a gift ^_^ ) 
 + 
 +==== Version 1.1 ==== 
 +  * Initial release. (i think) 
 + 
 +====== Changing the Configuration ====== 
 +===== As the Wearer ===== 
 + 
 +To change the parameters of the KDC Institutional Straitjacket, you need to use the SETTINGS button. This provides the following options: 
 + 
 +  * **FABRIC:** This sub menu will open the fabric selection menu. 
 +  * **ACL SETUP:** This sub menu allows you to control precisely who you allow some control on your straitjacket. 
 +  * **RLV OPTIONS:** If you are using a Restrained Life Viewer this sub menu will allow you to configure precisely what RLV features you want (disabled by default).
  
  
 ===== As a Master/Mistress ===== ===== As a Master/Mistress =====
-When the jacket is untied and if the ACL system allows you you can access the RLV_OPTION menu+When the jacket is untiedand providing the ACL system allows youyou can access the RLV_OPTION menu
  
  
 ====== Access Control ====== ====== Access Control ======
-The KDC Institutional Straitjacket features a two level access control system, to put it simply, you can define who can TIE the jacket or UNTIE the jacket from 3 groups:+The KDC Institutional Straitjacket features a two level access control systemyou can define who can TIE the jacket or UNTIE the jacket from using the following options:
  
-NOBODY:     Nobody can tie/untie the jacket. This is usefull if you simply want to wear it as a garment.+  * **NOBODY:** Nobody can tie/untie the jacket. This is usefull if you simply want to wear it as a garment. 
 +  * **LOCKER:** This option replace the "NOBODY" option for the right to untie you, so at least one person can untie you (the person who tied you up). 
 +  * **GROUP:** Only peoples from the group you are currently in can tie/untie you. 
 +  * **WHITELIST:** Only people listed in the notecard "whitelist.txt" can tie/untie you. 
 +  * **ANYONE:** Pretty self explanatory, anyone can have access
  
-LOCKER:        THis option replace the "NOBODY" option for the right to untie you, so at least one person can untie you (the person who tied you up).+Thus, using these options, you canfor example set the straitjacket so that ANYONE can tie you up but only those on your WHITELIST (i.e. your DOM/ME, partner, medical specialist :D, etc.can untie you
  
-GROUP        Only peoples from the group you are currently in can tie/untie you.+  * **NOTE:** someone who has access to locking/unlocking can also change the RLV configuration. 
 +====== The RLV Features ====== 
 +__**NOTE: requires RLV 2.03.00.00 or above**__
  
-WHITELIST:   Only the peoples whose name are written in the notecard "whitelist.txt" can tie/untie you.+This menu allows you to enable/disable different RLV features or disable RLV completely. Any slected restrictions will be applied as soon as the straitjacket is secured
  
-ANYONE      Pretty self explanatoryanyone can have access+  * **ENABLE/DISABLE:** Enable or disable the whole RLV system. It will automatically disable itself if you relog on a non RLV client and will send an alarm message to the person who tied you up (if applicable) 
 +  * **NOREZ:** Prevent you rezzing any object from your inventory. 
 +  * **NOEDIT:** Prevent you editing any objectwhether inworld or worn. 
 +  * **NOTOUCH:** Limits you to clicking/touching objects that are no more than 1.5 metres from you (you can still click the jacket). 
 +  * **LOCK:** Activates RLV locking and prevents you from detaching/removing the jacket, it also prevent the wearer to edit the jacket, if this function is not active the jacket will simply send a warning message to the person who tied you up.
  
-This allows you for example: to make it so ANYONE can tie you up but only your DOM/ME (doctor/nurse, whatever :D who are in the WHITELIST) are allowed to untie you. NOTE: someone who has access to locking/unlocking can also change the RLV configuration. +====== Fabric Options ====== 
-====== The RLV features ====== +The KDC Institutional Straitjacket allows a variety of fabric modules to be installed. The default texture for the jacket is a white canvas., the Jacket itself contain by default a Medical looking canvas fabric module.
-**RLV 1.17 or above only**+
  
-This menu let you enable/disable different RLV features or disable them all together, the RLV functions you select activate themselves when someone tie you up. +You can purchase further fabric modules from any KDC vendor
-The options are the following:+
  
-ENABLE/DISABLE :  Enable or disable the whole RLV systemIt will automatically disable itself if you relog on a non RLV client and will send an alarm message to the person who tied you up (if applicable+===== Installing New Fabrics ===== 
-**NOREZ:**                  Prevent you to rez any object from your inventory.+  - Unpack the fabric module to your Inventory. 
 +  - Take the straitjacket off if you are wearing it. 
 +  - Drag the straitjacket object from your Inventory and drop it on the floor inworld. 
 +  - Locate the Inventory folder that was created when you unpacked the fabric module, and drag and drop the FABRIC SCRIPT from the folder to your straitjacket and drop it into the ROOT prim of the jacket.  
 +  - TAKE the jacket back to your Inventory (do NOT try to wear it while it is still rezzed inworld!). 
 +  - WEAR the jacket from Inventory - the new fabric module should now be available from the Fabric option of the jacket's menu
  
-**NOEDIT:**                 Prevent you to edit any object in world or worn. 
  
-**NOTOUCH:**                Limit you to click/touch objects that are at 1.5 meters or closer (you can still click the jacket)+===== Changing the Fabric Style =====
  
-**LOCK:**                   Activate the RLV locking and prevent you to detach the jacket, if this function is not active the jacket will simply send a warning message to the person who tied you up.+Select FABRIC from the main menu. This will display two options:
  
 +  * **BASE:** This allows you to choose a base fabric for the jacket itself
 +  * **DETAILS:** This allows you to choose a detail fabric for the straps, reinforcement pieces, safety loops and the crotch strap
  
-====== The fabric selection menu ====== +Either option will display a multi-page menu containing all of your installed fabric nodulesClick on the fabric style you wish to use.
-The KDC Institutional Straitjacket allow a variety of fabric modules to be installed, the Jacket itself contain by default a Medical looking canvas fabric module. +
-(Please see the section 'installing new fabric modules' for more informations about this system).+
  
-When in the FABRIC submenu you should have access to the following options:+====== Struggle System ====== 
 +The KDC Institutional Straitjacket includes a a struggle system that allows the wearer to attempt to struggle free when strapped into the jacket.
  
-BASE:       To choose base Fabric  (it will cover all the flat parts of the Straitjacket) +Each time the jacket is locked, it generates sequence of moves (how many moves depends on how securely the jacket has been tied). The wearer can then try to struggle out of the jacket by guessing what this sequence is. To do this, the wearer simply touches the jacketwhich will display three options:
-DETAILS:  To choose a detail fabric (it will cover all the strapsreinforcement pieces , safety loops and the crotch strap)+
  
-Both options will lead you to a multi page selection system that allows you to choose a base fabric and a detail fabric from any of your active fabric modules. +  * TWIST 
-====== Struggling free ====== +  WIGGLE 
-The KDC Institutional Straitjacket offer a mini game that allows t's wearer to attempt to struggle free. +  PULL
-When someone strap you in the jacket, in place of the normal menu you will have access to 3 options: +
--TWIST +
--WIGGLE +
--PULL+
  
-You have to use those options to struggle free of the straitjacketEach time you are bound in the straitjacket, the jacket generate "secret code"it's length depend of how tight you have been tied up. +These are the options the wearer must use to try and recreate the sequence of moves need to escape the jacketClicking on correct move (twistwiggle or pull)If the right move is clicked, the jacket will send a hint. If the wrong move is clicked, the wearer gets tired and will have to wait 30 seconds before trying again. 
-In order to set yourself free, you have to recompose this code, the jacket will send you a hint when you are on the right track, if you make a wrong move you will get exhausted and you have to wait for 30 seconds before trying again.+
  
-//NOTE: the code only change when you are re-bound.//+**NOTE**The sequence is changed each time the jacket is re-locked.
  
  
-====== Installing new fabrics ====== +====== Adjusting the Straitjacket ====== 
-You can get extra fabric modules to get more customisation options out of your Straitjacket, installing a module is fairly simple, all you have to do is to drop the module script in the ROOT prims of the straitjacket, the new options should appear pretty much instantly, otherwise, simply detach/attach the Straitjacket and it should update.+In most cases, the jacket can be adjusted to fit using the EDIT/RESIZE sliders
  
-====== Adjusting the straitjacket ====== +Howeversome avatar types may experience some glitches near the chest or the shoulder blades. Should this happenpress CTRL-ALT-T to reveal the jacket'invisiprim, which encompasses most of the delicate zones of the chest/back/belly. Use this prim to make fine adjustments to the jacket's position on the avatar's body.
-In most casessimply scaling uniformly the jacket (the white handles when in edit/scale mode) will get it fitted for your body, however if you have some glitches near the chest or the shoulderblades, the jacket has an invisiprim that encompass most of the delicate zonesof the chest/back/belly, by adjusting this prim you will easily make your body fit in the jacket.+
  
-NOTE: The animation the jacket use twist the arms AND shoulders into the body, you need to take this in account when adjusting where the jacket sits on your neckline!+**IMPORTANT**: The animation the jacket use twist the arms AND shoulders into the body, and this needs to be taken into account when adjusting where the jacket sits on the neckline!
kdc_institutional_straitjacket/start.1265230055.txt.gz · Last modified: 2017/04/04 10:35 (external edit)