Differences

This shows you the differences between two versions of the page.

--- kdc_doodles_n_strikes:start [2016/09/29 22:18] – kyrahabattoir
+++ kdc_doodles_n_strikes:start [2019/05/08 13:30] (current) – Added skin and custom pen info. kyrahabattoir
@@ Line 1: / Line 1: @@
+{{ :kdc_doodles_n_strikes:teaser.png?nolink }}
 ====== Overview ======
 The KDC Doodles & Strikes for Avatar 2.0 is a set of scripted body overlays that allows avatars in close proximity to mark the body of the wearer with a selection of drawings, and also to slap them.
-__Essentially, it behaves as a combined body slapper and temporary tatoo engine.__
+__Essentially, it behaves as a combined body slapper and temporary tattoo engine.__
 **This product is a rigged mesh designed only to be used with Utilizator's Avatar 2.0 mesh body and will not work with any other body.**
@@ Line 28: / Line 29: @@
 {{ :touchbound_system:doodlemap.png?nolink }}
 //Note: Because rigged meshs cannot be touched, each area has a custom collider mesh which should work for most avatars but might require some slight resizing for some people.//
 ===== Main menu =====
 {{ :kdc_doodles_n_strikes:doodlestrikemain.png?nolink}}Simply wear the parts that you want to use. Once you do, clicking one of the drawing areas to open it's main menu. From there you will have access to the following options:
@@ Line 36: / Line 38: @@
   ***Re-ink:** All drawings slowly fade away over time, this options allows you to redraw it and fully load it with ink again.
 ===== Pen types =====
-{{ :touchbound_system:doodlestrikepen.png?nolink}}
+{{ :touchbound_system:doodlestrikepen.png?nolink}}After you selected the doodle that you wish to draw from its category, you will be presented with the "pen" selection menu.
-After you selected the doodle that you wish to draw from its category, you will be presented with the "pen" selection menu.
 The pen that you select will determinate both the color of the drawing and how long it will take for it to fade out completely:
@@ Line 50: / Line 51: @@
 //Note: You can perform a quick slap by clicking and holding the mouse down for a second before releasing, this is the same as selecting "Slap" from the "Hit" menu.//
-====== Disabling doodles ======
+====== Tips & tricks ======
-You might not like some of the provided doodles, or simply don't want to see them used against you?
+===== Avatar 2.0 slices =====
+By default, the overlays will automatically hide when they receive commands from the standard Avatar 2.0 slice HUD. They are also designed to perfectly match the Avatar 2.0 slice pattern.
+**If an overlay is completely hidden, the "Draw on" options will be unavailable.**
+===== Disabling doodles =====
+{{ :kdc_doodles_n_strikes:disabledoodle.png?nolink}}**You don't like some of the provided doodles, or simply don't want to see them used against you?**
 You can delete the notecard for the offending doodle or simply rename it by putting "-" in front of it's name to make it disappear from the available doodle s.
+===== Washing off doodles =====
+Doodles can take up to 24 hours to fully fade away, if you don't want to wait this long, simply have a little swim in the SecondLife seas/oceans and they will fade away a lot more quickly.
 ====== Modding ======
+===== Impactor skin adjustment =====
+Unlike the doodles, impact marks are typically drawn in full color. However, (as of version 5) you can specify a color to blend them better with your skin color/tone.
+In each body part's inventory, in edit mode, there is a notecard named "_config.BruiseTint=<255,255,255>".
+You can **rename it** and change the RGB value at the end to any RGB color and it will be applied to new impact marks.
 ===== Custom doodles =====
 ==== The texture ====
@@ Line 133: / Line 148: @@
   ***Verb:** This is the verb that will be used in the emote of the impactor.
   ***Energy:** How much energy each strike of this impactor is adding into the system, the more energy, the quicker an impactor will fade in, and the longer it will take for it to fade out.
+===== Custom pens =====
+As of version 5, pens are no longer hardcoded into the system, pens can be removed, added and edited.
+If you scroll down the inventory of one of the body parts (in edit mode), you will see that there is a serie of notecards whose name starts by "pen". Here are a few examples:
+<code>
+pen,Ballpoint,<236,63,69>,360,0,(Red) 6h
+pen,Felt,<89,123,213>,720,0,(Blue) 12h
+</code>
+Each of those notecards essentially defines a new pen with comma separated values, the same way doodles are defined:
+<code>
+pen,Name,<R,G,B>,Hardness,Glow,Description
+</code>
+  * **pen**: all pen definitions must start by "pen"
+  * **Name**: The name of the pen, try to keep it short and below 12 characters.
+  * **<R,G,B>**: The color of the pen, in RGB format from <0,0,0> to <255,255,255>.
+  * **Glow**: 0 or 1, determinates if this is a "glow in the dark" pen.
+  * **Description**: (Optional) You can add more text here and it will show on the pen selection menu.