User Tools

Site Tools


touchbound_system:fallenprincess

This is an old revision of the document!


Fallen Princess Collar

Supported TouchBound functions

Sensing zones

Supported locks

Chaining ring

Bolt sockets

Tight bolts

If the wearer of a piece of equipment use an allen key to bolt it together, they can always unbolt it. However if someone else does it, the wearer will be unable to undo the bolt on their own, however, anyone else can assist them.

Removeable Chaining ring

The chaining ring of the fallen princess collar is attached permanently to the mending plate that is used to bolt the collar together. If the collar is completely unbolted, the mending plate “falls out” and so does the chaining ring.

If the chaining ring is removed, any lock, accessory, or chain drawn to and from it will also be removed.

Bondage poses

This table contains all the special poses that the shock collar can initiate, the source object the the first object that you click in the touch sequence, while the target object is the second object in the sequence.

Some chaining combinations will offer you to add a specific bound poses, if the current avatar limb configuration allows it.

Some poses only use one arm at a time, which allows you to either bind both arms in the same pose, or use a different pose on the remaining arm. Check the corresponding column.

Pose Source object Target object Description & examples single wrist
Tight front Collar front ring Any wrist cuff One hand is tied at the front of the collar. yes
Low front Collar front ring Any wrist cuff Similar to “tight front” but in a lower, more relaxed position. yes
Stooped collar front ring belt front ring The wearer is forced to bend forward. N/A

Suspension poses

Source point Image
Front collar ring
touchbound_system/fallenprincess.1544010802.txt.gz · Last modified: 2018/12/05 11:53 by kyrahabattoir