User Tools

Site Tools


touchbound_system:fallenprincess

This is an old revision of the document!


Fallen Princess Collar

Supported TouchBound functions

Sensing zones

The bolt sockets can only be locked/unlocked using an allen key. The leashing/chaining ring is secured to the collar by the same bolts that are used to keep the collar locked. It will only be available if the collar is locked in place by at least one bolt. When the last bolt is removed, the chaining ring essentially “falls off” and all locks and chains to and from this ring will be removed after a couple minutes.

Supported locks

Chaining ring

Bolt sockets

Bondage poses

This table contains all the special poses that the shock collar can initiate, the source object the the first object that you click in the touch sequence, while the target object is the second object in the sequence.

Some chaining combinations will offer you to add a specific bound poses, if the current avatar limb configuration allows it.

Some poses only use one arm at a time, which allows you to either bind both arms in the same pose, or use a different pose on the remaining arm. Check the corresponding column.

Pose Source object Target object Description & examples single wrist
Tight front Collar front ring Any wrist cuff One hand is tied at the front of the collar. yes
Low front Collar front ring Any wrist cuff Similar to “tight front” but in a lower, more relaxed position. yes
Stooped collar front ring belt front ring The wearer is forced to bend forward. N/A

Suspension poses

Source point Image
Front collar ring
touchbound_system/fallenprincess.1537277364.txt.gz · Last modified: 2018/09/18 13:29 by kyrahabattoir